Blog/

How to Find Similar Companies on LinkedIn Sales Navigator

You find similar companies on LinkedIn Sales Navigator two ways: open one of your best customers' company pages, click the three-dot menu, and select "View similar" to get LinkedIn's own lookalike suggestions, or run a keyword and firmographic filter search using terms and attributes pulled from the customers you already have.

This is for anyone who has a short list of accounts that already work (current customers, closed-won deals, or just companies that fit the profile you are chasing) and wants to turn that list into a bigger set of comparable prospects. It covers how to pick the right seed customers, both Sales Navigator methods step by step, how to combine several seed accounts into one list, where this approach runs out of road, and how to find companies similar to your best customers beyond Sales Navigator.

What does "similar companies" mean on LinkedIn Sales Navigator?

It means companies that share enough firmographic and descriptive traits with a company you point it at: industry, employee count, geography, and the language used in the company's own LinkedIn description and specialties. LinkedIn is not reading your CRM or guessing at buying intent. It is comparing company profile data, so the result is only as good as how well your seed account's profile reflects the kind of company you actually want more of.

That distinction matters before you start: a lookalike search on a single seed account gives you companies that resemble that one account, not necessarily companies that resemble your ideal customer in general. The fix, covered below, is to use several seed accounts at once rather than one.

How do you pick the right seed customers?

Your seed accounts are the input the whole search depends on, so the quality of your matches is capped by the quality of this list.

  1. Pull your current customer list and sort it by a business outcome, not deal size. Retention, expansion revenue, time-to-value, or product usage depth are better signs of an ideal customer than logo size.
  2. Exclude the outliers. A single large logo that closed for reasons that will not repeat (a personal relationship, a one-off pilot budget) will skew the profile if you include it.
  3. Write down why each one is ideal, in one sentence. This step feels slow, but it is what lets you tell the difference between "similar" and "actually a good fit" when you review the results.
  4. Keep the five to ten that best represent the pattern as the seeds you run searches on. Fewer than five and the list reflects one or two accounts' quirks; many more becomes hard to track by hand.

How do you use the "View Similar" feature to find lookalike companies?

  1. Open Sales Navigator and search for the company you want to use as a seed, or go directly to its company page.
  2. Open the company page and find the overflow menu (the three dots next to the "Follow" / "Save" buttons).
  3. Select View similar. Sales Navigator opens a filtered account search pre-populated with that company's industry, headcount range, and headquarters region.
  4. Scroll through the results. LinkedIn also surfaces a smaller "Similar companies" module directly on some company pages, without needing the menu, as a shortcut to the same kind of list.
  5. Save the accounts worth pursuing to a Sales Navigator list so you don't lose them in a search you can't easily re-run later.

This is the fastest way to get a first list, and it requires no setup. The tradeoff is that you see the result, not the reasoning: Sales Navigator does not show you why a given company was considered similar, or how close a match it actually is. Two companies in the same search can be a near-perfect fit and a loose fit respectively, and the list does not tell you which is which.

How do you use keyword and account filters to find similar companies instead?

Instead of asking LinkedIn to infer similarity, you can build the same kind of list yourself with explicit filters, which gives you more control over what "similar" means for your specific case.

  • Keywords. Sales Navigator's keyword field searches company name, description, and specialties. Pull two or three terms your best customers actually use to describe themselves (not generic industry words) and search those directly. A niche phrase specific to how your customers describe their own business will narrow the list further than a broad industry keyword.
  • Industry. Match the primary industry (or a short list of adjacent industries) of your seed accounts.
  • Employee count. This is one of the two heaviest signals in practice. A 30-person agency and a 5,000-person enterprise rarely buy the same way or on the same cycle, even inside the same industry, so a wide headcount range will pull in companies that look similar on paper but behave nothing like your actual customers.
  • Geography and headquarters location. Useful when your product has a regional dependency (local compliance, time zone, in-person sales motion) and less useful when it does not.

The advantage of this route over "View Similar" is that you can combine filters your actual customers share, rather than accepting whichever traits LinkedIn's algorithm weighted. The tradeoff is that it takes longer to set up and tune, and a filter combination that is too narrow will return very few results while one that is too broad defeats the point of the exercise.

How do you combine several seed accounts into one lookalike list?

Run either method above on multiple seed accounts, not just one, and treat a company that shows up across several of those searches as a stronger match than one that only appears once.

  1. Take the five to ten seed accounts you picked above. Avoid using your single biggest or most unusual customer as the only seed; outliers produce an outlier lookalike list.
  2. Run "View similar" (or your keyword and filter search) separately on each seed account.
  3. Keep a simple list of which companies showed up for which seeds. A company that appears for three or more of your seed accounts is a better bet than one that only showed up for one.
  4. Dedupe and save the final list, prioritizing the companies with the most overlap.

This frequency-based approach takes more manual work than a single "View Similar" click, but it directly fixes the biggest weakness of a one-seed lookalike list: that it only reflects one account's profile rather than the pattern across your actual customer base.

What are the limits of Sales Navigator's similarity matching?

For a small, one-off push, either method above is genuinely enough: if you have a handful of seed accounts and a team that already has Sales Navigator seats, there is no reason to reach for anything heavier. The limits show up once you try to scale or repeat the process.

  • The matching logic is not visible. You get a list, not a reason, so qualifying the list still comes down to manually reviewing each account.
  • It only compares profile data. Sales Navigator matches on industry, headcount, location, and description. It does not compare the tools a company runs, its growth stage, or the way your customers actually use your product, which are often what separates a good fit from a company that only looks similar.
  • It is a one-time snapshot, not something you monitor. "View similar" answers "who looks like this company today." It does not tell you when a company on that list starts showing the kind of recent change, a funding round, a new VP, a hiring push, that would make this the right moment to reach out. Headcount, funding stage, and tech stack all shift within months, so a list built once and left alone goes stale.
  • It does not scale past manual review. Running the multi-seed method above across ten seed accounts, by hand, for every new segment you want to prospect, is real work that someone has to repeat every time your ICP shifts or your seed list changes.

How do you find companies similar to your best customers beyond Sales Navigator?

Match on the traits your best customers actually share, not just the ones Sales Navigator can filter on, then add a timing signal on top. Two companies can share an industry and headcount and still be a bad match if one has already solved the problem your product addresses in-house, or has no budget for it this year.

A useful lookalike profile covers four kinds of traits:

TraitExamplesVisible in Sales Navigator?
FirmographicsIndustry, sub-industry, employee count, revenue range, geographyMostly yes
TechnographicsThe tools and platforms a company runs, which signal both fit and integration compatibilityNo
Growth stage and signalsRecent funding, active hiring in relevant roles, leadership changesPartly (headcount growth)
Behavioral fitHow your existing customers actually use your productNo (it lives in your own data)

Then build the list in this order:

  1. Write the shared traits down. From your seed accounts, note the industry, size band, tech stack, and the event that usually precedes a purchase (a new hire in a specific role, a funding round, a tool migration).
  2. Search on those traits, not only on dropdown filters. The more a tool forces you to pre-select an industry code, a headcount bracket, and a location before it returns anything, the more likely you are to exclude a company that matches on substance but not on the exact filter values you picked.
  3. Review why each company matched. A list without evidence is a black box: you cannot tell a rep why one company is on it, and you cannot fix the profile when it is wrong.
  4. Layer in live signals. Hiring activity, funding events, and tech-stack changes are what turn "this company fits the profile" into "this company is worth contacting this week."
  5. Push the list into your workflow once it is reviewed, whether that is a CRM, a sequencer, or a manual outreach queue. This guide to lead list building covers turning a raw match list into something a rep can actually work.

The most common mistake is matching on firmographics alone. Industry and headcount are the easiest traits to filter on, which is why most tools stop there, and also the traits that return companies that look right and convert badly.

How does Retriever help here?

The underlying question behind a lookalike search, "which companies actually resemble the ones that already work for us," is the same question Retriever's AI agents for lead generation are built to answer, without needing a seed account as a starting point. Pick an idea, delegate once: you write what you want in one prompt instead of reverse-engineering it from a company profile, and your agent finds the right companies, gathers what you need to know about them, and reaches out, then keeps running. Instead of filtering a static database, it reads the live web (a company's website, its job posts, its reports), and every lead is checked against your ICP with the source behind it, so you can see why a company qualifies instead of trusting an opaque algorithm.

That covers the traits Sales Navigator cannot compare. If your best customers all run a specific billing platform and publish their pricing publicly, the agent can check both on each company's own website, where no filter field exists for them.

On top of that, the agent tracks hiring, funding, job changes, tech stack, and LinkedIn engagement continuously, so a company that fits your profile resurfaces the moment something changes, instead of sitting in a list you built once and never revisited. Teams that want to reach Retriever's data and agents from Claude, ChatGPT, or Cursor can do it through the MCP and API.

Building the list is only half the job. Turning a fresh lookalike list into outreach the sales team actually runs, instead of quietly ignoring, is a separate problem; this guide to outbound sales automation covers how to roll it out so reps adopt it. See what data and signals agents use, or book a demo to see it against your own best customers.

Frequently asked questions

How many seed accounts should I use to build a lookalike list? Five to ten is a reasonable range for running searches. Fewer than that and the list reflects the quirks of one or two accounts rather than a real pattern; many more than that becomes hard to track by hand without a frequency-based method.

How do I find companies similar to my best customers? Pick your best customers by business outcome (retention, expansion, usage), write down the traits they share (firmographics, tech stack, growth stage, and the event that usually precedes a purchase), search for companies with those traits, and layer in a current buying signal. Sales Navigator's "View similar" is a fast first pass, but it only compares profile data.

Is matching on industry and company size enough? No. Industry and headcount are a starting filter, not a full profile. The stronger signal is a combination of technographics, growth-stage signals (funding, hiring), and, where possible, how your existing customers actually use the product.

Do I need a paid Sales Navigator subscription to use "View similar"? Yes, the "View similar" feature and the account search filters it relies on are part of Sales Navigator, not LinkedIn's free tier.

Can I export a list of similar companies directly from Sales Navigator? You can save matches to a Sales Navigator list for ongoing tracking inside the platform. Exporting the underlying data out of Sales Navigator is restricted by LinkedIn's terms of service, which is part of why teams that need a list outside the platform build it through filters and manual review instead.

Is a company that LinkedIn calls "similar" the same as a true ICP match? Not necessarily. LinkedIn's similarity is based on firmographic and profile-description overlap with one seed company. Your actual ideal customer profile may depend on factors, like a specific buying signal or a tech-stack detail, that firmographic similarity alone does not capture.

How often should I refresh a lookalike list once I've built it? Treat it as a snapshot that ages. Re-running the search periodically, or watching for new signals on the companies already on the list, matters more than how carefully the list was built in the first place, since a company that was a perfect fit six months ago may no longer be one today.